Print
this Page
Send
to a Colleague
    |
 |
|
|
Home : Product Catalog : Industrial Air Dryers : MVP Success Stories  Air Dryer Success Stories  Air Dryers have proven successful throughout many industries. If your process suffers from "wet" air, our air dryers can provide relief. See what just a few of our air dryer customers are saying about the product line:Aviation  Chris Wilkins, Director Prop Aircraft, Central Flying Service, Little Rock, Arkansas “Before installing the HD2 MVP Air Dryer we actually had oily water dripping from our mechanic’s air tools! Moisture in the compressed air rusts the tools bearings and ultimately destroys the drives. Not to mention it ultimately was rusting out the approximately 600 feet of air piping between hangers. Now in our fourth year of use, we have had no further trouble.” Automotive Ronnie de St. Germain, Body Shop Manager, Banner Chevrolet, New Orleans, Louisiana “We operate two large compressors and paint six to twelve cars a day. Prior to learning about and installing the HD6 Air Dryer system we were getting “fisheyes” in paint jobs (drips due to water getting into the air lines of pneumatic spray guns)(sic). This was causing delays in getting our customer jobs out on a timely basis plus increased costs due to having to sand out the fisheye and then repaint the job. With the New Orleans humidity, and our outdoor tank location, we were forced to drain the tank twice a day. That is how much moisture we were fighting before the TECO Engineers solved our problem. We have had no more problems since we made the installation four years ago. I would say the system paid for itself the first month of operation.” Commercial Truck Diesel Engine Mechanics Jason Phillips, Manager, Penske Truck Leasing, Harahan, Louisiana “Our mechanics use very expensive air tools and heavy duty air jacks to service the big diesel engines that power our 18-wheeler tractors. A ¼” drive air ratchet can cost up to $200.00 and a ¾” tool costs four to five hundred dollars. Water in the compressed air would quickly destroy seals and seize-up tools, jacks or other pneumatic devices. We have had no such trouble since installing TECO HD2 MVP Air Dryers in our 10 HP piston type compressed air system.” All of the MVP Air Dryer end users have proclaimed their installations a success with rapid payback and surprising low operating costs. For more information on our TECO MVP Air Dryers, call us at 800-839-6381. |
Protect our Planet - Recycle Broken Magmeters
 |