Print
this Page
Send
to a Colleague
    |
 |
|
|
Home : Pulp & Paper Solutions : Consistency Measurement : HK Microwave Transmitter  TECO HK Microwave Consistency Transmitter
Low cost – typically less than half the cost of other microwave transmitters Easy to install One point calibration Adjustable antenna units to maximize sensitivity to process conditions Internally compensated for temperature No routine maintenance required. Install & forget! Current and Digital Outputs Contact closure Versatile – Same transmitter can be used in Pipes, tanks, chests, belts & chutes. Description The TECO HK series of microwave transmitters consist of transmitter and an antennae body. Depending on the model, the transmitter and antennae body can be configured as a single unit, or alternatively, the transmitter can be mounted remotely from the antennae body (useful for harsh environments). The antenna body itself can be configured with fixed or adjustable antennas, which permits the operator to maximize the sensitivity of the HK to his process conditions. The HK unit is designed to be mounted in virtually any environment, from process pipes to chests. It can also be mounted to measure conveyer or chute stock, such as wood chips. The HK unit is equipped with a Pt RTD for stock temperature compensation. The unit can optionally be equipped with a display for at-line or remote measurement display. Applications include: Low cost – typically less than half the cost of other microwave transmitters Easy to installOne point calibrationAdjustable antenna units to maximize sensitivity to process conditionsInternally compensated for temperatureNo routine maintenance required. Install & forget!Current and Digital OutputsContact closureVersatile – Same transmitter can be used in Pipes, tanks, chests, belts & chutes.The TECO HK series of microwave transmitters consist of transmitter and an antennae body. Depending on the model, the transmitter and antennae body can be configured as a single unit, or alternatively, the transmitter can be mounted remotely from the antennae body (useful for harsh environments). The antenna body itself can be configured with fixed or adjustable antennas, which permits the operator to maximize the sensitivity of the HK to his process conditions.The HK unit is designed to be mounted in virtually any environment, from process pipes to chests. It can also be mounted to measure conveyer or chute stock, such as wood chips.The HK unit is equipped with a Pt RTD for stock temperature compensation. The unit can optionally be equipped with a display for at-line or remote measurement display.Applications include:
Display: 2x24 character LCD, LED Backlit; dialog with pushbuttons and alphanumeric display Power: 115/230V, 47-65Hz, 50VA consumption Housing: IP65, NEMA 4 (Aluminum) Weight: 11 pounds Dimensions: 9”x7.9”x4.3” Analog Outputs: two 0/4-20ma active, isolated outputs. 500 ohm max resistance Analog Input: One 0/4-20ma non-isolated input, 125 Ohm max load. Communications: Two Com ports, RS232, Optionally RS485. Relay: One 250VAC, 30VDC, 1A contact Microwave: ISM band, 2.45 Ghz, 1mW, 0dBm Sensitivity: -80dBm, 1nW Operating Temp: -20 to 85 C Sensor Operating Temp: -30-170C (Optionally 250 C) Storage Temp: -30 to 95 C CE Mark Noise Immunity: IEC 801 part 1-5 Radiation: EN55011 Teil B Instrument Safety: IEC 1010-1
|
Online Freeness Analyzer
 |
